Optimal design of nonlinear model predictive controller based on new modified multitracker optimization algorithm

The controller design for the robotic manipulator faces different challenges such as the system's nonlinearities and the uncertainties of the parameters. Furthermore, the tracking of different linear and nonlinear trajectories represents a vital role by the manipulator. This paper suggests an optimal design for the nonlinear model predictive control (NLMPC) based on a new improved intelligent technique and it is named modified multitracker optimization algorithm (MMTOA). The proposed modification of the MTOA is carried out based on opposition-based learning (OBL) and quasi OBL approaches. This modification improves the exploration behavior of the MTOA to prevent it from becoming trapped in a local optimum. The proposed method is applied on the robotic manipulator to track different linear and nonlinear trajectories. The NLMPC parameters are tuned by the MMTOA rather than the trial and error method of the designer. The proposed NLMPC based on MMTOA is compared with the original MTOA, genetic algorithm, and cuckoo search algorithm in literature. The superiority and effectiveness of the proposed controller are confirmed to track different linear and nonlinear trajectories. Furthermore, the robustness of the proposed method is emphasized against the uncertainties of the parameters.     

Disassembly sequence planning using a Flatworm algorithm

Disassembly Sequence Planning (DSP) refers to a disassembly sequence based on the disassembly properties and restrictions of the product parts that meets the benefit goal. This study aims to reduce the number of changes in disassembly direction and disassembly tools so as to reduce the disassembly time. This study proposes a novel Flatworm algorithm that evolves through the regenerative properties of the flatworm. It is similar to the evolutionary concept of genetic algorithms, with evolution as the main idea, but without crossover, mutation or replication mechanisms in the evolutionary processes. Instead, it is based upon the characteristics of the growth, fracture and regeneration mechanisms of the flatworm. The Flatworm algorithm features a variety of disassembly combinations and excellent mechanisms to avoid the local optimal solution. In particular, it has the advantage of keeping a good disassembly combination from being destroyed. In this study, it is compared with two genetic algorithms and two ant colony algorithms and tested in three examples of different complexity: a ceiling fan, a printer, and 150 simulated parts. The solution searching ability and execution time are compared upon the same evaluation standard. The test results demonstrate that the novel Flatworm algorithm proposed in this study is superior to the two genetic algorithms and ant colony algorithms in solution quality.     

一种超长级联国际传输专线故障机器定位算法的研究

国际电路不同于一般网内电路，具有跨多运营商、超长距离和级联组网的特性，这些特性给该类电路的故障定位带来挑战，但同时也形成其特有的规律。本文通过总结日常运维经验和分析各厂家设备告警信号传递规律，总结出可以用于计算机实现的国际电路故障定位算法。     

基于ＰＩＤ控制算法的直流微网容错控制方法研究

构建直流微网容错控制对象模型，调节直流微电网的输出回路参数；以输出功率、直流微网的 参考电压、弱电网下系统惯性响应特征等为约束参量，构建直流微网容错控制目标函数，在不同电网强度下 进行直流微网容错控制的参数自整定性调节，采用无功环比例积分控制方法进行直流微网容错寻优分析， 建立模糊 ＰＩＤ控制模型，采用变结构的模糊 ＰＩＤ控制方法进行直流微网容错控制过程中的自适应加权学习 和误差反馈调节，实现直流微网容错控制改进设计。仿真结果表明，采用该方法进行直流微网控制的容错 性能较好，输出稳定性较强，具有较好的直流微网输出增益。     

换热网络优化中换热单元生成频次的影响分析及策略改进

换热单元的生成频次对换热网络优化有直接的影响，分析其机理可以指导求解算法的改进。本文采用节点非结构模型及强制进化随机游走算法，通过设置不同的换热单元生成概率与生成个数以改变换热单元的生成频次，观察并记录个体在优化过程中产生的年综合费用变化情况。发现不同生成频次下整型变量和连续变量的相对优化频率发生了变化，从而改变了整体优化过程，并且与个体当前优化状态不适应的生成频次会造成相对优化频率不平衡、优化结果较差。基于此，本文提出了一种具有生成参数动态调节策略的换热单元生成方式，在优化过程中根据个体状态实时调整换热单元的生成概率与生成个数，平衡整型变量与连续变量的相对优化频率。最后，采用15SP、10SP和20SP算例进行验证，换热网络的年综合费用较文献结果分别下降了1.06%、0.16%、0.68%，验证了该策略使得换热单元的生成频次更为合理，有效地提高了算法的优化效率。     

The potential of energy flexibility of space heating and cooling in Portugal

This study assesses the potential of energy flexibility of space heating and cooling for a typical household under different geographical conditions in Portugal. The proposed approach modifies the demand through the optimization of the thermostat settings using a genetic algorithm to reduce either operational costs or interaction with the grid. The results show that the used energy flexibility indicator expresses the available potential and that flexibility depends on several factors, namely: i) thermal inertia of the archetypical household; ii) the time of use electricity tariffs; iii) users’ comfort boundaries; and iv) the geographical location of the houses.     

基于线特征及迭代最近点算法的地基建筑物点云自动配准方法

为克服迭代最近点(ICP)算法易陷入局部最优的缺陷，提出一种基于线特征及ICP算法的地基建筑物点云自动配准方法。首先，基于法向一致性进行建筑物点云平面分割；接着，采用alpha-shape算法进行点簇轮廓线提取，并拆分和拟合处理得到特征线段；然后，以线对作为配准基元，以线对夹角和距离作为相似性测度进行同名特征匹配，实现建筑物点云的粗配准；最后，以粗配准结果为初值，进一步采用ICP算法完成点云精确配准。利用两组部分重叠的建筑物点云进行配准实验，实验结果表明，采用由粗到精的配准方法能有效改善ICP算法对初值依赖的问题，实现具有部分重叠的建筑物点云的有效配准。     

Loss cost reduction and power quality improvement with applying robust optimization algorithm for optimum energy storage system placement and capacitor bank allocation

Power losses cause the underutilization of distributed generation (DG) units in addition to the cost increasing in microgrid. Minimizing these losses has been focused in many papers. Using energy storage system (ESS) is a crucial solution for loss reduction. ESS can balance the power exchange in on-peak times where its location and size optimization can improve the microgrid efficiency and reduce the loss cost significantly. Moreover, to ensure the power quality by improving the voltage profile, capacitor bank can be installed optimally on some buses. Optimization of size and location of the capacitor bank can enhance the reactive power that is leading to power loss reduction. In other words, the capacitor bank is applied to compensate the total reactive power and consequently, the current is reduced that results in power loss reduction. In this article, the problem is defined as the optimum location and size of ESS and capacitor bank in the microgrid. Due to the complexity of the problem in many options for selecting the buses to implement these elements (ESS and capacitor bank), robust approach using the particle swarm optimization algorithm and general algebraic modeling system are applied for optimization process. In addition, the uncertainty of renewable DGs such as photovoltaic and wind turbine is modeled by probability density functions and Monte-Carlo is used for selecting more probable cases in optimization processes. The results show the loss cost reduction and improvement in voltage and power profile with less fluctuations and more stability.     

基于彩色图像处理的浮选尾煤灰分软测量研究

浮选尾煤灰分是浮选产品的一个重要指标。针对选煤厂浮选尾煤灰分多采用离线检测而无法实现在线准确测量，以及当前浮选软测量多采用单一的灰度图像从而导致软测量模型精度及适应性较差的问题，提出了一种基于彩色图像处理的浮选尾煤软测量方法，建立了基于最小二乘支持向量机(LSSVM)的浮选尾煤灰分软测量模型。模型以不同颜色空间的彩色特征、灰度均值以及浓度特征为输入变量，以尾煤灰分作为输出变量，采用粒子群优化算法对LSSVM模型参数进行优化。结果表明：所建立的尾煤灰分软测量模型可以较好地实现浮选尾矿灰分的在线预测，引入浮选尾矿图像的彩色特征可以提高尾煤图像分析的精度，预测精度达96.89%。研究成果在柳湾选煤厂现场应用，并取得了较好的尾矿灰分测量效果。     

Mechanical,surface morphological and multi-objective optimization of tribological properties of V2O5 doped lead calcium titanate borosilicate glass ceramics

In the 55[(Pb_xCa_1−x).OTiO₂]-44[2SiO₂.B₂O₃]-1V₂O₅ system, various experimental studies were performed to obtain the mechanical and tribological properties of synthesized glass ceramics (GCs). The surface morphological study and elemental analysis were carried out using scanning electron microscope (SEM) followed by EDAX. The tribological measurements were also performed; based on Taguchi's L₂₅ orthogonal array, considering different GC compositions, sliding speeds and loads. The signal to noise (S/N) ratio was used to identify the influencing parameters on minimizing wear coefficient (k) and coefficient of friction (COF). To improve the tribological properties, the modeling of output responses was performed using response surface methodology (RSM) that was being used for multi-objective optimization using a Pareto optimality approach i.e. Genetic Algorithm (GA). The experimentally achieved k and COF were compared with the earlier work that carried out by the authors for germanium (Ge) doped GC samples. It is observed that the various mechanical properties (Vickers hardness, 29 GPa, Young's modulus, 1808 MPa, and compressive strength, 221 MPa) improved significantly in comparison to the Ge doped GC samples. The improved mechanical and tribological properties of the synthesized GC can be used as a coating material for the structural alloys and machine tool slides in view of its effective wear and corrosion resistance.